thiet-bi-chuyen-doi-tin-hieu-tu-modbus-rtu-sang-tcp-ip-nport-5250a-dai-ly-moxa-tai-viet-nam.png

Giới Thiệu dòng sản phẩm:

NPort 5150AI-M12/NPort 5250AI-M12/NPort 5450AI-M12 Series

Bài viết: Hướng dẫn cấu hình thiết bị NPort 5110A/NPort 5130A/NPort 5150A (Nhấn vào đây)

Bài viết: Hướng dẫn cách chọn đúng chế độ hoạt động cho Nport (Nhấn vào đây)

Bài viết: Khi nào cần mở rộng cổng COM port kết nối nhiều máy tính cùng lúc (Nhấn vào đây)

Bài viết: Chọn thiết bị Nport nào cho ứng dụng của bạn (Nhấn vào đây)

Bài viết: Sự khác nhau giữa Nport và Mgate-Gateway (Nhấn vào đây)

Tham gia Group Facebook: "Những người làm mạng công nghiệp" (Nhấn vào đây)

Features and Benefits 

  • Speedy 3-step web-based configuration
  • COM port grouping and UDP multicast applications
  • Real COM/TTY drivers for Windows and Linux
  • Standard TCP/IP interface and versatile TCP and UDP operation modes
  • Complies with all EN 50155 mandatory test items*
  • M12 connector and IP40 metal housing
  • 2 kV isolation for serial signals
    *This product is suitable for rolling stock railway applications, as defined by the EN 50155 standard. For a more detailed statement, click here: www.moxa.com/doc/specs/EN_50155_Compliance.pdf

Introduction

The NPort 5000AI-M12 serial device servers are designed to make serial devices network-ready in an instant, and provides direct access to serial devices from anywhere on the network. Moreover, the NPort 5000AI-M12 is compliant with EN 50121-4 and mandatory sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration,  making them suitable for rolling stock and wayside applications where high levels of vibration exist in the operating environment.

3-step Web-based Configuration

The NPort 5000AI-M12’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort 5000AI-M12’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.

Easy to Troubleshoot

NPort 5000AI-M12 device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.